Buying a great chop saw can be confusing if you don’t know what to base your choice on.
In this article, we did our best to help you by writing a review on some chop saws and answering some questions that are probably on your mind, so that you find the best chop saw.
At 19 pounds, this chop saw can easily be transported from one place to another; it is the perfect tool for workers who are always on the go.
It is also highly robust and efficient, due to its 10-ampere motor that reaches up to 3.500 RPM, and it enables you to do a wide range of work with its 7.25 cutting range.
In addition to all the extremely great features mentioned above, it does not need coolant to operate! It produces almost no sparks at all and does a great job of minimizing the amount of heat produced when it is working. If you think that this only applies to cutting thin and smooth material, you are absolutely wrong! It almost has no heat build-up at all, even if you cut through steel.
This is the perfect device for professionals due to its ease of transportation and the ability to perform efficiently. Also, it prevents you from worrying about catching fire thanks to its spark-and-coolant-free performance.
DeWalt DW872 is a very reliable power tool that is perfect for professionals. Its 15-ampere motor that can reach up to 3.800 RPM along with its 70-tooth, carbide-tipped blade enables it to cut through a variety of materials such as wood, metal, etc.
Moreover, its carbide-tipped blade allows the depth of cut to remain constant throughout blade life, and its 14-inch 70-tooth carbide-tipped blade delivers a lower cost-per-cut compared to cutting with abrasive wheels.
Moreover, if you want to get your work done quickly, DeWalt DW872 can cut four times faster than standard saws, and eight times faster than portable band saws. It can also create cuts that are virtually free of burrs.
Additionally, the 70 teeth saw blade can give you a lower cost per cut than competitors – especially when compared to an abrasive wheel cutting method.
DeWalt DW872 is a suitable chop saw for professionals. It can create precise cuts in a very short span of time. Moreover, you can rest assured that the depth of the cut will stay constant thanks to its carbide-tipped blade.
Porter-Cable PCE700 is a chop saw that allows you to make straight and angled cuts. Its powerful 15-ampere motor can reach up to 3.800 RPM, allowing you to finish your work quickly and efficiently.
It can even be adjusted to give you a range of motion up to 45 degrees so that you can create perfect cuts. Moreover, thanks to its miter adjustment, amazing cutting fence, and quick release material clamp, there is not much that Porter-Cable PCE700 cannot do.
To make sure that you always stay safe, it comes with a spark deflector.
This is a nice chop saw for making straight and angled cuts. It comes with extra brushes so that you can replace the brushes that get worn out. Moreover, its 3.800 RPM enables you to make precise cuts quickly.
This 15-ampere chop saw can reach up to 1300 RPM, which means that it is not as powerful as its fellow chop saws. However, it comes with appealing features; for example, it has miter settings that allow you to adjust the angle of your cut from 0 to 45 degrees.
It can cut through up to 4.5 inches of metal at a 90-degree angle and 3.5 inches of metal at a 45-degree angle.
Moreover, it is safe to use thanks to its amazing built-in safety features; it has a two-finger trigger in a D-shaped handle so that it is safe and comfortable to use. This also enables you to make repeated cuts without any accidents. Also, if you are always worried about accidental startups, you don’t need anymore. Makita LC1230 has a built-in lock-off button that prevents this from happening.
Besides, it is 50 times more durable than abrasive wheels thanks to its carbide-tipped blade that can produce virtually burr-free cuts.
There’s nothing you cannot do with this impressive tool. It does not only make accurate cuts at 90 degrees, but you can also customize precise cuts at 45 degrees. It is also safe and easy to use.
This chop saw, with its 15-ampere motor and 1.650 RPM, will enable you to finish your work efficiently and quickly. It is also made of durable metal, so it can take any kind of work material you throw at it.
Moreover, it does not need coolant to work. It cuts faster than and outperforms the majority of abrasive saws. Besides, you’ll have a smooth finish because it produces almost no burrs at all.
Evolution Power Tools EVOSAW380 enables you to cut through anything thanks to its powerful motor and durable body material. Moreover, it requires no coolant to work, so it is safe to say that there is no risk of catching fire while working.
DeWalt D28715 will help you produce great work thanks to its 15-ampere motor that has 5.5 horsepower, its ample overload protection, and its ability to operate at a no-load speed of 4,000 RPM. Moreover, it comes with miter settings that enable you to cut at both 90 and 45-degree angles.
You will also not waste any of your valuable time because its blade-changing process does not require using a wrench. Besides, it is easy to use because it has a D-shaped handle that minimizes fatigue.
DeWalt D28715 has a great design, enabling users to work efficiently, comfortably, and quickly due to its 5.5 horsepower motor, D-shaped handle and no-wrench blade changing, respectively.
You can use Bosch 3814 to power through the toughest of materials, and you have its powerful 15-ampere motor that can reach up to 3.900 RPM to thank for this.
You will also be able to work quickly and effectively thanks to its locking vise that comes with a quick-release designed to fit some different materials.
Moreover, you can use it to make precise cuts from 0 to 45 degrees as well as 90 degrees thanks to its adjustable fencing. Another piece of great news is that you won’t have to guess how deep you should cut because you can adjust its depth level.
You can also use the lock on the trigger if you are going to work for an extended period of time.
This is a great device if you need to finish your tasks quickly and efficiently. You also do not have to guess the depth level of the cuts because you can adjust it. You can also make cuts at 90 degrees and starting from 0 to 45 degrees.
This 15-ampere power tool that can reach up to 1450 RPM is a very reliable chop saw for professionals.
It comes with a multipurpose 14-inch blade that has 36 teeth so that you can cut mild steel, aluminum, wood, and other materials with one blade. It can even cut through wood with embedded nails. This blade lasts longer than 20 abrasive discs.
Moreover, it cuts with no sparks, no heat, and no burrs, so you are going to get clean cuts. It also has a fast action swivel clamping mechanism that allows 0-45 degree miter cuts.
Get this chop saw if you are a professional looking for efficiency and accuracy. It is especially great for its multifunctional blade that can cut through almost anything.
Beginners can easily get confused between a chop saw and a circular saw. Their confusion is understandable because they are quite similar regarding their appearance. However, if you use them, you will realize that they are as different as day and night.
Indeed, they both have circular blades, but this is the only thing that they have in common. A chop saw can only move up and down; whereas, a circular saw can move in several different directions.
That is to say that with a circular saw, you can bring the material to the blade to make cuts, but with a chop saw, you can only bring the blade to the material. It also means that a circular saw can make angled cuts; whereas, a chop saw cannot.
You can also check out our Chop Saw vs Miter Saw article.
A chop saw is best used for cutting wood with ease and efficiency. It only moves up and down so it can only make straight cuts and square cuts. It is also great for trying to build frames or molding.
You can also use a metal chop saw to cut metals, although this is not highly advisable. For cutting metals, you better use power tools that are made explicitly for that purpose.
Choosing the best chop saw is not so hard anymore, is it?
All you need to do is to consider your needs and buy the one that is most suitable to fulfill them.
If you want my opinion, I would recommend buying Evolution Power Tools RAGE4 for its lightweight, power, and no need for coolant. It is extra safe to use it because it produces no sparks. You can get a lot of work done with this efficient chop saw.
For a professional, DeWalt DW872 is great for getting a lot of work done in a short span of time because it can cut four times faster than standard saws. It is also great due to its versatility and capability to cut through various materials. It also does not produce any burrs.
If you want to make angled cuts, then PORTER-CABLE PCE700 is your one. Its miter adjustment, amazing cutting fence, and quick release material clamp allow it to do all you ask of it.
No matter which chop saw you get, stay safe by following the safety measures stated above and reading the manufacturer’s manual.